RANNPLUS ENGINEERING
TR  EN  RU  RO

Basalt is a mineral wool variety derived from a mixture of rocks such as diabase, Dolamite. Mineral wools are highly stable materials as a result of not losing the properties of both fibers and binding materials for a long time. Fire resistance (the fire resistance of a Rockwool sandwich panel can vary between 30 and 120 minutes depending on the stonewool type, thickness and combination details) and Rockwool has lower values than plastic foam in thermal insulation, which gives excellent results in sound insulation. In buildings which are important for fire resistance, stone wool plates consisting of inorganic fibers are used as sandwich panel core material. Open porous materials(such as glass wool, stone wool, acoustic sponge) are used for insulation of air-borne sounds. Sound absorber materials are porous or fibrous materials which cause friction losses of the air entering the spaces in their structure and they are effective through the conversion of some of the acoustic energy into heat energy. Sandwich panels with stone wool filling are much better for sound insulation than other panels.
The high quality, waterproof, flexible and durable structure of industrial buildings, which are based on fire resistance and the desired RAL colors and painted galvanized sheet metal sandwich panels, provides effective solutions for the roof, facade and interior compartments of industrial buildings.

Service Details >>

Polyurethane (PUR) is the foam most commonly used in sandwich panel production. A mixture of four raw materials is obtained: Polyol, isocionate, inflator Gas (N-pentane) and catalyst. Polyurethane, which has been used in sandwich panel production for nearly 55 years, is known as the most reliable insulating material. It does not hold water in its body and saves up to 40% against bacteria and pest expenses. Investors always expect high performance at low cost, and the best response to that expectation is polyurethane.
Especially with the insulation provided by the 4 cm thick and 70 cm thick brick wall in the siding and the installation of polyurethane sandwich panels consisting of painted galvanized sheet with the desired RAL colors, it provides effective solutions for the roof, facade and interior compartments of industrial buildings.

Service Details >>

In systems with sloping roofs below 5%, one side membrane covered sandwich panel is used. PVC (polyvinylchloride) and TPO (polyolefin) membrane are insulating membranes that are resistant to atmospheric conditions, UV resistant, polyester equipped, geotextile felt laminated, combined with hot air supply. They provide fire, heat and waterproofing on low pitched roofs. The bottom surface of the sandwich panel is metal (painted galvanized sheet) and the top surface is membrane-generated, saving time and craftsmanship as there is no need for additional waterproofing material to be coated during assembly at the construction site. The panels are connected to the carrier system by self-threading screws. It is then glued to the other panel by the ear lamination method.
Roof covering with membrane panel systems, which are an alternative to the coating solutions of low-pitched roofs, provides the possibility to complete without any problems.

Service Details >>

As a single layer natural galvanized sheet, painted galvanized sheet and aluminum trapeze, high quality; heat, Sound, Fire insulation is the most economical coating system that is not important in the first degree. It is particularly preferred in the roofing and siding of mineral ore processing plants.

Service Details >>

In this system, coating materials can be created with a variety of variations, offering the ability to choose materials of selected properties and thicknesses according to the purpose of use in the roofs and facades of industrial buildings. According to the carrier system and the characteristic features of the structure, the layers that will form the superstructure are decided. Insulation material in general, stone wool or glass wool is preferred.
In steel and prefabricated buildings, the lower and upper layers of this system, which is easy to use, are separate from each other and the Z profiles, not the heat insulation material, serve as the carrier is one of the main differences of the system. Mounting the trapezes in the lower and upper layers to the system with z profiles eliminates the insulation problem that may occur in the screws as a result of the expansion of the metals and ensures seamless sealing to the system.

Service Details >>

In-place Application System, flat and trapezoidal clamped up to 1.5% of the slope providing complete sealing, aesthetic, desired RAL colors, high quality, roof and facade cladding sheets. Painted aluminum is a shock resistant, maintenance-free, long-lasting and recyclable coating system manufactured by forming from painted galvanized sheet rolls, which can be produced at the desired length according to the application place, which is attached to the steel system with hidden clips and assembled by compressing the edges with machinery or hand tools. In general, gyms, otogars, shopping malls and large business centers, such as large openings in one piece as the ideal solution is a kind of coating is asked to pass.

Service Details >>

Polycarbonate systems are separated as multi-storey, single-storey solid, modular facade polycarbonate sheets, lockable polycarbonate systems.Multi-layer polycarbonate sheets provide the most ideal solution in places that require the best use of daylight, and are extremely resistant to impacts due to their resin properties. It is very light compared to coating materials such as glass and acrylic. It provides ease of design in architecture due to its cold bending feature. It is long-lasting and has excellent light passing through protection systems such as ultraviolet filtration and water retention on the surface.Single-layer solid polycarbonate sheets; as with multi-layer polycarbonate sheets, the typical feature is unbreakable as well as MM/m2 si 1.2 kg because of the weight of the glass provides an excellent advantage.Solid polycarbonate sheets produced without ultraviolet and ultraviolet provide a price advantage for indoor and outdoor applications. Solid polycarbonate sheets, which are suitable for cold and hot bending, are an inevitable material for places where safety is of paramount importance and have excellent light transmission. The modular facade system is an interlocking modular system that can be used in various thicknesses (16/20/40mm), ideal for industrial siding and windows. The modular system is a product with high light transmission, good thermal insulation and an aesthetic appearance with reduced connection profiles. The system is complemented by anodized aluminum frame, sealing seals and balancing profiles. The locking polycarbonate system represents the natural development of clip systems thanks to the advantages of the special joining Channel. When mounted externally, it provides resistance to high wind absorption force with its sealing compound and flawless bottom surface. The specially designed shape of its side edges helps reduce the sounds caused by material expansion. Sheets can also be combined using an inward-facing aluminum channel to provide greater resistance to snow load.
We meet your skylight needs with our teams of experts in installation, providing a wide variety of products that provide the most superior quality for indoor and outdoor areas for the necessary skylight requirements for industrial buildings.

Service Details >>

The most important factor that complicates people's escape in the event of a fire and causes loss of life is smoke. Smoke has 3 important effects. These;It drops the sight distance, the escape routes disappear and leads to poisonings. By carrying the heat causes the fire to spread on the bed.It makes it difficult for response teams to determine the source of the fire. Will result in loss of time.The use of smoke evacuation covers in buildings is of great importance in order to get rid of fire conditions with minimal damage such as this.Smoke evacuation caps have extra benefits besides the task. They are connected to the system by a piston engine and the same covers can also be used for ventilation purposes. Pistons are controlled by electrical energy and support fresh air input in the structure. The latter provides daylight saving thanks to its translucent coating. It helps in saving energy and reducing carbon emissions.

Service Details >>

Drain siphonic filters are connected to the collection line, which is mounted with zero slope, and connected to the infrastructure system by a smaller number of stormwater columns than the conventional drainage system. Thanks to the special filters and hydraulic calculations used, the siphonic effect is created and the system is operated with 100% filling capacity. In this way, smaller pipe diameters are used compared to conventional drainage system. Given the cost of infrastructure, it provides more economical solutions, especially in facilities with large roof areas and hol. With zero slope, the pipes are laid on the horizontal. It is thus a more useful solution in private buildings such as convention halls, airports, shopping malls and places with large roof spaces.
After the necessary calculations are made to remove rainwater from the structure, which is a big problem for the roofs, the Drain is completed smoothly with the installation of siphonic filters.

Service Details >>